South-pointing chariot

South-pointing chariot
Traditional Chinese 指南車
Simplified Chinese 指南车

Contents

The south-pointing chariot (or carriage) was an ancient Chinese two-wheeled vehicle that carried a movable pointer to indicate the south, no matter how the chariot turned. Usually, the pointer took the form of a doll or figure with an outstretched arm. The chariot was supposedly used as a compass for navigation, and may also have had other purposes.

There are legends of earlier south-pointing chariots, but the first reliably documented one was created by Ma Jun (c. 200–265 CE) of Cao Wei during the Three Kingdoms, about eight hundred years before the first navigational use of a magnetic compass. No ancient chariots still exist, but many extant ancient Chinese texts mention them, saying they were used intermittently until about 1300 CE. Some include information about their inner components and workings.

There were probably several types of south-pointing chariot which worked differently. In most or all of them, the rotating road wheels mechanically operated a geared mechanism to keep the pointer aimed correctly. The mechanism had no magnets and did not automatically detect which direction was south. The pointer was aimed southward by hand at the start of a journey, then, whenever the chariot turned, the mechanism rotated the pointer relative to the body of the chariot to counteract the turn and keep the pointer aiming in a constant direction, to the south. Thus the mechanism did a kind of directional dead reckoning, which is inherently prone to cumulative errors and uncertainties. Some chariots' mechanisms may have had differential gears. If so, it was probably the first use of differentials anywhere in the world.

Legend and history

Legend

Legend has it that Huangdi, credited as being the founder of the Chinese nation, lived in a magnificent palace in the Kunlun Mountains.

There was also at this time another tribal leader, Chi You, who was skilled at making weapons and waging war. He attacked the tribe of Yandi, driving them into the lands of Huangdi. Huangdi was angered by this and went to war with Yandi, initially suffering several defeats. At some stage in the fighting Chi You conjured up a thick fog to confound Huangdi's men. They used the south-pointing chariot to find their way and they were ultimately victorious.

History

It was recorded in the Sanguo Zhi (Records of the Three Kingdoms) that the 3rd century CE mechanical engineer Ma Jun from the Kingdom of Wei was the inventor of the south-pointing chariot (also called the south-pointing carriage). After being mocked by Permanent Counsellor Gaotang Long and the Cavalry General Qin Lang that he could not reproduce what they deemed a non-historical and nonsensical pursuit, Ma Jun retorted "Empty arguments with words cannot (in any way) compare with a test which will show practical results". After inventing the device and proving those who were doubtful wrong, he was praised by many, including his contemporary Fu Xuan, a noted poet of his age.

After Ma Jun the south-pointing chariot was re-invented by Zu Chongzhi (429–500 CE), after the details of its instructions had been lost temporarily in China. During the Tang Dynasty (618–907 CE) and Song Dynasty (960–1279 CE) the south-pointing chariot was combined with another mechanical wheeled vehicle, the distance-measuring odometer.

Some early historical records state that the south-pointing chariot was invented around the first millennium BCE, but such evidence is obscure.

Historical texts for south-pointing chariot

Earliest sources

The south-pointing chariot, a mechanical-geared wheeled vehicle used to discern the southern cardinal direction (without magnetics), was given a brief description by Ma's contemporary Fu Xuan.[1] The contemporary 3rd century CE source of the Weilüe, written by Yuan Huan also described the south-pointing chariot of Ma Jun.[2] The Jin Dynasty (265–420 CE) era text of the Shu Zheng Ji (Records of Military Expeditions), written by Guo Yuansheng, recorded that south-pointing chariots were often stored in the northern gatehouse of the Government Workshops (Shang Fang) of the capital city.[2] However, the later written Song Shu (Book of Song) (6th century CE) recorded the south-pointing chariot's design and use in further detail, as well as created background legend of the device's (supposed) use long before Ma's time, in the Western Zhou Dynasty (1050–771 BCE). The book also provided description of the south-pointing chariot's re-invention and use in times after Ma Jun and the Three Kingdoms. The 6th century CE text reads as follows. (In this translation, by Needham, the south-pointing chariot is referred to as the south-pointing carriage. Also, he uses "AD" to denote dates in the Common Era, and "BC" for dates Before the Common Era.):

The south-pointing carriage was first constructed by the Duke of Zhou (beginning of the 1st millennium BC) as a means of conducting homewards certain envoys who had arrived from a great distance beyond the frontiers. The country to be traversed was a boundless plain, in which people lost their bearings as to east and west, so (the Duke) caused this vehicle to be made in order that the ambassadors should be able to distinguish north and south. The Gui Gu Zi book says that the people of the State of Zheng, when collecting jade, always carried with them a 'south-pointer', and by means of this were never in doubt (as to their position). During the Qin and Former Han dynasties, however, nothing more was heard of the vehicle. In the Later Han period, Zhang Heng re-invented it, but owing to the confusion and turmoil at the close of the dynasty it was not preserved.[3]
In the State of Wei, (in the San Guo period) Gaotong Long and Qin Lang were both famous scholars; they disputed about the south-pointing carriage before the court, saying that there was no such thing, and that the story was nonsense. But during the Qing-long reign period (233–237 AD) the emperor Ming Di commissioned the scholar Ma Jun to construct one, and he duly succeeded. This again was lost during the troubles attending the establishment of the Jin Dynasty.[4]
Later on, Shi Hu (emperor of the Jie Later Zhao Dynasty) had one made by Xie Fei, and again Linghu Sheng made one for Yao Xing (emperor of the Later Qin dynasty). The latter was obtained by emperor An Di of the Jin in the 13th year of the Yi-xi reign-period (417 AD), and it finally came into the hands of emperor Wu Di of the Liu Song Dynasty when he took over the administration of Chang'an. Its appearance and construction was like that of a drum-carriage (odometer). A wooden figure of a man was placed at the top, with its arm raised and pointing to the south, (and the mechanism was arranged in such a way that) although the carriage turned round and round, the pointer-arm still indicated the south. In State processions, the south-pointing carriage led the way, accompanied by the imperial guard.[5]
These vehicles, constructed as they had been by barbarian (Qiang) workmen, did not function particularly well. Though called south-pointing carriages, they very often did not point true, and had to negotiate curves step by step, with the help of someone inside to adjust the machinery. The ingenious man from Fanyang, Zi Zu Chongzhi frequently said, therefore, that a new (and properly automatic) south-pointing carriage ought to be constructed. So towards the close of the Sheng-Ming reign period (477–479 AD) the emperor Shun Di, during the premiership of the Prince of Qi, commissioned (Zi Zu Chongzhi) to make one, and when it was completed it was tested by Wang Seng-qian, military governor of Tanyang, and Liu Hsiu, president of the Board of Censors. The workmanship was excellent, and although the carriage was twisted and turned in a hundred directions, the hand never failed to point to the south. Under the Jin, moreover, there had also been a south-pointing ship.[5]

The last sentence of the passage is of great interest for navigation at sea, since the magnetic compass used for seafaring navigation was not used until the time of Shen Kuo (1031–1095). Although the Song Shu text describes earlier precedents of the south-pointing chariot before the time of Ma Jun, this is not entirely credible, as there are no pre-Han or Han Dynasty era texts that describe the device.[6] In fact, the first known source to describe stories of its legendary use during the Zhou period was the Gu Jin Zhu book of Cui Bao (c. 300 CE), written soon after the Three Kingdoms era.[2] Cui Bao also wrote that the intricate details of construction for the device were once written in the Shang Fang Gu Shi (Traditions of the Imperial Workshops), but the book was lost by his time.[2]

Japan

The invention of the south-pointing chariot also made its way to Japan by the 7th century. The Nihon Shoki (The Chronicles of Japan) of 720 CE described the earlier Chinese Buddhist monks Zhi Yu and Zhi You constructing several south-pointing Chariots for Emperor Tenji of Japan in 658 CE.[7] This was followed up by several more chariot devices built in 666 CE as well.[7]

South-pointing chariot in Song Shi

The south-pointing chariot was also combined with the earlier Han Dynasty era invention of the odometer (also Greco-Roman), a mechanical device used to measure distance traveled, and found in all modern automobiles. It was mentioned in the Song Dynasty (960–1279 CE) historical text of the Song Shi (compiled in 1345) that the engineers Yan Su (in 1027 CE) and Wu Deren (in 1107 CE) both created south-pointing chariots, which it details as follows. [8] (In Needham's translation, inches and feet (ft) are used as units of distance. 1 inch is 25.4 millimetres. 1 ft is 12 inches or 304.8 mm.)

In the 5th year of the Tian-Sheng reign period of the emperor Renzong (1027 AD), Yan Su, a Divisional Director in the Ministry of Works, made a south-pointing carriage. He memorialised the throne, saying, [after the usual historical introduction]: 'Throughout the Five Dynasties and until the reigning dynasty there has been, so far as I know, no one who has been able to construct such a vehicle. But now I have invented a design myself and have succeeded in completing it'.[8]
'The method involves using a carriage with a single pole (for two horses). Above the outside framework of the body of the carriage let there be a cover in two stories. Set a wooden image of a xian (immortal) at the top, stretching out its arm to indicate the south. Use 9 wheels, great and small, with a total of 120 teeth, i.e. 2 foot-wheels (i.e. road-wheels, on which the carriage runs) 6 ft. high and 18 ft. in circumference, attached to the foot wheels, 2 vertical subordinate wheels, 2.4 ft. in diameter and 7.2 ft. in circumference, each with 24 teeth, the teeth being at intervals of 3 inches apart.[8]
'...Then below the crossbar at the end of the pole, two small vertical wheels 3 inches in diameter and pierced by an iron axle, to the left 1 small horizontal wheel, 1.2 feet in diameter, with 12 teeth, to the right 1 small horizontal wheel, 1.2 ft. in diameter, with 12 teeth, in the middle 1 large horizontal wheel, of diameter 4.8 ft. and circumference 14.4 ft., with 48 teeth, the teeth at intervals of 3 inches apart; in the middle a vertical shaft piercing the center (of the large horizontal wheel) 8 ft. high and 3 inches in diameter; at the top carrying the wooden figure of the xian'.[8]
'When the carriage moves (southward) let the wooden figure point south. When it runs (and goes) eastwards, the (back end of the) pole is pushed to the right; the subordinate wheel attached to the right road-wheel will turn forward 12 teeth, drawing with it the right small horizontal wheel one revolution (and so) pushing the central large horizontal wheel to revolve a quarter turn to the left. When it has turned around 12 teeth, the carriage moves eastwards, and the wooden figure stands crosswise and points south. If (instead) it turns (and goes) westwards, the (back end of the) pole is pushed to the left; the subordinate wheel attached to the left road-wheel will turn forward with the road-wheel 12 teeth, drawing with it the left small horizontal wheel one revolution, and pushing the central large horizontal wheel to revolve a quarter turn to the right. When it has turned round 12 teeth, the carriage moves due west, but still the wooden figure stands crosswise and points south. If one wishes to travel northwards, the turning round, whether by east or west, is done in the same way'.[9]

After this initial description of Yan Su's device, the text continues to describe the work of Wu Deren, who crafted a wheeled device that would combine the odometer and south-pointing chariot:

It was ordered that the method should be handed down to the (appropriate) officials so that the machine might be made. In the first year of the Da-Guan reign period (1107 AD), the Chamberlain Wu Deren presented specifications of the south-pointing carriage and the carriage with the li-recording drum (odometer). The two vehicles were made, and were first used that year at the great ceremony of the ancestral sacrifice.[10]
The body of the south-pointing carriage was 11.15 ft. (long), 9.5 ft. wide, and 10.9 ft. deep. The carriage wheels were 5.7 ft. in diameter, the carriage pole 10.5 ft. long, and the carriage body in two stories, upper and lower. In the middle was placed a partition. Above there stood a figure of a xian holding a rod, on the left and right were tortoises and cranes, one each on either side, and four figures of boys each holding a tassel. In the upper story there were at the four corners trip-mechanisms, and also 13 horizontal wheels, each 1.85 ft. in diameter, 5.55 ft. in circumference, with 32 teeth at intervals of 1.8 inches apart. A central shaft, mounted on the partition, pierced downwards.[10]
In the lower story were 13 wheels. In the middle was the largest horizontal wheel, 3.8 ft. in diameter, 11.4 ft. in circumference, and having 100 teeth at intervals of 2.1 inches apart. (On vertical axles) reaching to the top (of the compartment) left and right, were two small horizontal wheels which could rise and fall, having an iron weight (attached to) each. Each of these was 1.1 ft. in diameter and 3.3 ft. in circumference, with 17 teeth, at intervals of 1.9 inches apart. Again, to left and right, were attached wheels, one on each side, in diameter 1.55 ft., in circumference 4.65 ft., and having 24 teeth, at intervals of 2.1 inches.[10]
Left and right, too, were double gear-wheels (lit. tier-wheels), a pair on either side. Each of the lower component gears was 2.1 ft. in diameter and 6.3 ft. in circumference, with 32 teeth, at intervals of 2.1 inches apart. Each of the upper component gears was 1.2 ft. in diameter and 3.6 ft. in circumference, with 32 teeth, at intervals of 1.1 inches apart. On each of the road-wheels of the carriage, left and right, was a vertical wheel 2.2 ft. in diameter, 6.6 ft. in circumference, with 32 teeth at intervals of 2.25 inches apart. Both to left and right at the back end of the pole there were small wheels without teeth (pulleys), from which hung bamboo cords, and both were tied above the left and right (ends of the) axle (of the carriage) respectively.[10]
If the carriage turns to the right, it causes the small pulley to the left of the back end of the pole to let down the left-hand (small horizontal) wheel. If it turns to the left, it causes the small pulley to the right of the back end of the pole to let down the right (small horizontal) wheel. However, the carriage moves the xian and the boys stand crosswise and point south. The carriage is harnessed with two red horses, bearing frontlets of bronze.[10]

Chariots with differential gears

Background and explanation

There is a widely believed hypothesis that most, if not all, south-pointing chariots worked by means of differential gears. A differential is an assembly of gears, nowadays used in almost all automobiles except some electric and hybrid-electric ones, which has three shafts linking it to the external world. They are conveniently labelled A, B, and C. The gears cause the rotation speed of Shaft A to be proportional to the sum of the rotation speeds of Shafts B and C. There are no other limitations on the rotation speeds of the shafts.

In an automobile, Shaft A is connected to the engine (through the transmission), and Shafts B and C are connected to two road wheels, one on each side of the vehicle. When the vehicle turns, the wheel going around the outside of the turning curve has to roll further and rotate faster than the wheel on the inside. The differential permits this to happen while both wheels are being driven by the engine. If the sum of the speeds of the wheels is constant, the speed of the engine does not change.

In a south-pointing chariot, according to the hypothesis, Shaft B was connected to one road wheel and Shaft C was connected through a direction-reversing gear to the other road wheel. This made Shaft A rotate at a speed that was proportional to the difference between the rotation speeds of the two wheels. The pointing doll was connected (possibly through intermediate gears) to Shaft A. When the chariot moved in a straight line, the two wheels turned at equal speeds, and the doll did not rotate. When the chariot turned, the wheels rotated at different speeds (for the same reason as in an automobile), so the differential caused the doll to rotate, compensating for the turning of the chariot.

The hypothesis that there were south-pointing chariots with differential gears originated in the 20th Century. People who were familiar with modern, e.g. automotive, uses of differentials interpreted some of the ancient Chinese descriptions in ways that agreed with their own ideas. Essentially, they re-invented the south-pointing chariot, as it had previously been re-invented several times in antiquity. Working chariots that use differentials have been constructed in recent decades. Whether any such chariots existed previously is not known with certainty.

If the hypothesis is true, then the Chinese probably knew about differentials centuries before Europeans. There has been speculation that the ancient Greeks knew about them in about 100 BCE, but this is now considered unlikely. The first true differential gear definitely known to have been used in the Western world was by Joseph Williamson in 1720.[11] He used a differential for correcting the equation of time for a clock that displayed both mean and solar time.[11] Even then, the differential was not fully appreciated in Europe until James White emphasized its importance and provided details for it in his Century of Inventions (1822).[11]

Geometrical properties

If the south-pointing chariot were built perfectly accurately, using a differential gear, and if it travelled on an Earth that was perfectly smooth, it would have interesting properties. It would be a mechanical compass that transports a direction, given by the pointer, along the path it travels. Mathematically the device performs parallel transport along the path it travels.

The chariot can be used to detect straight lines or geodesics. A path on a surface the chariot travels along is a geodesic if and only if the pointer does not rotate with respect to the base of the chariot.

Because of the non-Euclidean geometry of the Earth's surface (due to it being curved around as a globe), the chariot would generally not continue to point due south as it moves. For example, if the chariot moves along a geodesic (as approximated by any great circle) the pointer should instead stay at a fixed angle to the path. Also, if two chariots travel by different routes between the same starting and finishing points, their pointers, which were aimed in the same direction at the start, usually do not point in the same direction at the finish. Likewise, if a chariot goes around a closed loop, starting and finishing at the same point on the Earth's surface, its pointer generally does not aim in the same direction at the finish as it did at the start. The difference is the holonomy of the path, and is proportional to the enclosed area. If the journeys are short compared with the radius of the Earth, these discrepancies are small and may have no practical importance. Nevertheless they show that this type of chariot, based on differential gears, would be an imperfect compass even if constructed exactly and used in ideal conditions.

Lack of precision, and implications

Real machines are never built perfectly accurately. Simple geometry shows that if the chariot's mechanism is based on a differential gear and if, for example, the width of the track of the chariot (the separation between its wheels) is three metres, and if the wheels are intended to be identical but actually differ in diameter by one part in a thousand, then if the chariot travels one kilometre in a straight line, the "south-pointing" figure will rotate nearly twenty degrees. If it initially points exactly to the south, at the end of the one-kilometre trip it will point almost to the south-southeast or south-southwest, depending on which wheel is the larger. If the chariot travels nine kilometres, the figure will end up pointing almost due north. Obviously, this would make it useless as a south-pointing compass. To be a useful navigational tool, the figure would have to rotate no more than, say, a couple of degrees over a journey of a hundred kilometres, but this would require the chariot's wheels to be equal in diameter to within one part in a million. Even if the process of manufacturing the wheels were capable of this precision (which would not be possible with ancient Chinese methods), it is doubtful that the equality of the wheels could be maintained for long as they are subjected to the wear and tear of travelling across open country. Irregularity of the ground would add further errors to the device's functioning.

Considerable scepticism is therefore warranted as to whether this type of south-pointing chariot, using a differential gear for the whole time, was used in practice to navigate over long distances. Conceivably, the south-pointing doll was fixed to the body of the chariot while it was travelling in straight lines, and coupled to the differential only when the chariot was turning. The charioteer could have operated a control to do this just before and after making each turn, or maybe shouted commands to someone inside the chariot who connected and disconnected the doll and the differential. This could have been done without stopping the chariot. If turns were brief and rare, this would have greatly reduced the pointing errors, since they would have accumulated only during the short periods when the doll and differential were connected. However, it raises the problem of how the chariot could have been kept travelling in straight lines with sufficient accuracy without using the pointing doll.

If the real purposes of the chariot and the accounts of it were amusement and impressing visiting foreigners, rather than actual long-distance navigation, then its inaccuracy might not have been important.

Chariots without differential gears

Although the hypothesis that the south-pointing chariot used differential gears has gained wide acceptance, it should be recognized that functional south-pointing chariots without differential gears are possible. The ancient descriptions are often unclear, but they suggest that the Chinese implemented several different designs, at least some of which did not include differentials.

Mechanical designs

Some of the ancient descriptions suggest that some south-pointing chariots could move in only three ways: straight ahead, or turning left or right with a fixed radius of curvature. A third wheel might have been used to fix the turning radius. If the chariot was turning, the pointing doll was connected by gears to one or other of the two main road wheels (e.g. whichever was on the outside of the curve around which the chariot was moving) so the doll rotated at a fixed speed, relative to the rate of the chariot's movement, to compensate for the predetermined rate of turn. The doll turned in opposite directions depending on which road wheel was connected to it, so its rotation compensated for the chariot turning left or right. This design would have been simpler than using a differential gear.

The chariots of Yan Su and Wu Deren appear to have used this type of mechanism. (See descriptions quoted from the Song Shi, above.) Apart from the presence of components in Wu Deren's vehicle to make it function as an odometer, there were only minor differences between them. In each chariot, the two main road wheels were attached to vertical gear wheels. A large horizontal gear wheel was linked (possibly via intermediate gearing) to the pointing doll, and was positioned so a diameter almost spanned the space between the uppermost points of the vertical gear wheels. When the chariot was moving straight ahead, there was no connection between these gears, but when the chariot turned, a small gear wheel was lowered into contact with the horizontal gear and one of the vertical gears, thus linking the doll to one of the road wheels. Two small gear wheels were available, one to connect the horizontal gear to each of the vertical ones. Of course, they were not used simultaneously. The small gear wheels were raised and lowered by an arrangement of weights, pulleys and cords which were attached to the pole to which the horses that pulled the chariot were harnessed. When the horses moved to one side or the other, in order to turn the chariot, the pole moved and the cords lowered the appropriate small gear wheel into its working position. When the horses returned to walking straight ahead, the small gear wheel was raised out of contact with the main horizontal and vertical gears. Thus the system functioned automatically. The mirror-symmetry of the vertical gears being linked by the small gears to the horizontal gear at diametrically opposite points caused the horizontal gear to rotate in opposite directions depending on which road wheel was linked to it, thus rotating the pointing doll in opposite directions when the chariot turned left and right.

The description does not mention a third road wheel to fix the turning radius, but it is possible that such a wheel was present. No gears would have been attached to it, so perhaps the author of the description did not mention it because he did not realize that it was an important part of the mechanism. Putting such a wheel on the chariot and making it function properly would not have been difficult. It might have been attached to the pole to which the horses were harnessed. Stops would have been provided to limit the motions of the pole to left and right.

If a third road wheel was included, this type of south-pointing chariot could have worked quite accurately as a compass when used for short journeys under good conditions, but if used for long journeys it would have been subject to cumulative errors, like chariots using the differential mechanism.

If in fact there was no third road wheel, the chariot might have functioned as a compass if turns were always made so that one of the two wheels was stationary and only the other rotated, with the pointing doll connected to it by gears. The charioteer could have kept the stationary wheel from turning by controlling the horses appropriately. (A brake would have helped, but there is no mention of one in the description.) The radius of the curve around which the rotating wheel moved would have equalled the track-width of the chariot, and the gears turning the doll would have been chosen accordingly. This design would have worked as a compass for short journeys, but would have suffered from cumulative errors if used for long ones. Also, the chariot would have been slow and awkward to turn. This might not have mattered if turns were rarely executed.

The Song Shi description of the gears in Yan Su's chariot, and the numbers of teeth on them, suggests that it worked this way, without a third road wheel. The gear ratios would have been correct if the pointing doll was attached directly to the large horizontal gear wheel, and the track-width of the chariot equalled the diameter of the road wheels. Wu Deren's chariot also appears to have been designed to work this way. The width of the chariot, and therefore presumably the track-width, was greater than the diameter of the wheels. The gear ratios were appropriate for these dimensions.

The charioteer would have had to use great skill to ensure that the radius of each turn of the chariot was correct to make one of the wheels exactly stop rotating. Unless he did this correctly, the pointing doll would not have kept aiming to the south. He would have been able to adjust the direction in which it aimed by making turns that were more or less sharp. This would sometimes have given him opportunities to use the chariot dishonestly. If it was being demonstrated to spectators, for example, and was being driven around in front of them, making many turns, the charioteer, who would have known which way was south, would have been able to make the chariot appear to work extremely accurately as a compass for long periods. The spectators could have been shown the machinery, and would have seen that the charioteer could not manipulate the doll. They would presumably have been impressed by the apparent accuracy of the mechanism. It is possible that this type of chariot was sometimes constructed with the prime purpose of fraudulently impressing spectators. Possibly, people who built these chariots deceived their own employers with them, which could have gained them fame and fortune provided nobody tried using the chariots for real navigation. Maybe it is not surprising that the chariots were "lost" when conflicts flared up!

Other mechanical designs for the south-pointing chariot are also possible, including ones that employ a device that is used today, the gyro compass. However, there is no indication that the ancient Chinese knew of these.

Non-mechanical possibilities

Some south-pointing chariots may not have been purely mechanical devices. Someone riding inside the chariot may have used some non-mechanical method of determining the compass directions, and turned the doll on top of the chariot accordingly. There are several methods that could have been used, for example:

Unlike mechanisms that rely on the rotation of road wheels, most of these methods can be used at sea. This may account for the mention (see "Earliest sources", above) that a marine version of the south-pointing chariot existed.

These methods can work accurately over long distances, unlike the mechanical designs for the chariot.

Necessity of non-mechanical orientation

Some non-mechanical method of finding the south must have been used when a mechanical south-pointing chariot was initialized, aiming its pointer to the south at the start of a journey. Any of the methods mentioned above in "Non-mechanical possibilities" could have been used.

If any south-pointing chariot was really used for long-distance navigation, it must have relied (after initialization) on a non-mechanical direction-finding method. It might have been operated non-mechanically by someone riding in it, as outlined above. Alternatively, if it had a mechanical mechanism, it must have been frequently re-initialized non-mechanically to eliminate accumulated errors and uncertainties.

The only chariots that might not have needed non-mechanical methods of finding the south would have been those that were never used for long-distance navigation. If some chariots were used only for amusement or fraud, they could have worked purely mechanically. Even initialization could have been avoided by simply declaring some arbitrary direction to be "south".

Timeline

The south-pointing chariot has been invented and reinvented at many times throughout Chinese history. Below is a partial timeline of the major events;

Year Event
2634 BCE According to Legend, the Yellow Emperor designs the south-pointing chariot. It is built for him by the craftsman Fang Bo.
1115 BCE During the reign of the Duke of Chou, the duke gives five such devices (called Zhinan) to ambassadors of Yueshang to get them back home.
120 .. 139 CE Zhang Heng might have reinvented the vehicle.
233 .. 237 Ma Jun constructs a working vehicle for Emperor Ming of Wei.
300 Cui Bao reports that the construction is described in a book (not preserved) named Shang Fang Ku Shih.
334 .. 349 Xie Fei makes one for Later Zhao Jie state Emperor Shi Jilong (石季龍, aka Shi Hu)
394 .. 416 Linghu Sheng makes one for Emperor Xiaowu of Jin China.
417 Linghu Sheng's vehicle is captured by Emperor An of Jin. It is reported that, at this time, there is no machinery, but only a man inside who turns the figure.
423 .. 452 Guo Shanming fails to make one for Emperor Taiwu of Northern Wei.
423 .. 452 Ma Yue succeeds, but he is killed by Guo Shanming.
478 Zu Chongzhi makes a new improved (bronze gears) vehicle for Emperor Shun of Liu Song.
658 Buddhist monk Chiyu constructs vehicle for Japanese Emperor Tenji
666 Monk Chiyu constructs another vehicle for Japanese Emperor Tenji.
806 .. 821 Jin Gongli presents a south-pointing carriage to Emperor Xianzong of Tang.
1027 Engineer Yan Su (member of the "Board of Works") describes his construction (5 cogged, 4 non-cogged gear wheels, 18 soldier-drivers).
1107 Chamberlain Wu Deren presents a specification (24 cogged, 4 non-cogged gear wheels), which is successfully built twice.
1341 Chu Tê-Jun describes a jade figure as part of a miniature south-pointing carriage.
1720 Joseph Williamson uses a differential gear in a clock.
1834 Julius Klaproth writes to Alexander von Humboldt, noting the south-pointing chariot chih-nan-ch´ê, but assumes that a magnetic compass is hidden in the little doll.
1879 James Starley first uses a differential gear in a vehicle.
1909 Professor Giles points out that the directional property of the south-pointing chariot was effected by a mechanical system, and not by magnetism.
1909 Professor Bertram Hopkinson (Cambridge) remarks that some mechanism would have been required to ensure that the gears connected to the chariot wheels at right and left were engaged or disengaged when the chariot turned right or left. After some years of study, he declares that Yen Su's specification is insufficient to build a working model.
1910 The first mechanical navigation aide, "Jones Live Map", is invented. Like in the south-pointing chariot, the movement of the road wheels is geared down, but this time to show the relative position of the vehicle on a map.
1924 Rev. A. C. Moule (Cambridge) proposes a realization of Wu Tê-Jen's specification, where the chariot is allowed to drive only in straight lines. For each turn it is stopped, a gear connected and the turn done on the spot, the pointer now being corrected automatically.
1924 K. T. Dykes is the first to propose a differential gearing, arguing that the clutch mechanism proposed by Moule is "slow and complicated to drive".
1932 Dr. J.B.Kramer discovers references to the mechanical nature of the south-pointing chariot and declares that the Chinese therefore did not invent the magnetic compass, unaware that the magnetic compass had been described by Shen Kuo about 200 years before its (re)invention in Europe.
1932 George Lanchester (chief engineer at Lanchester Motor Company) proposes that the ancient machines (Ma Jun notably) embodied some kind of differential gear. He builds a working model to prove his concept.
1937 Wang Zhenduo proposes a realization of Yan Su's specification and builds a working model from it.
1948 Bao Sihe proposes another reconstruction.
1955 F.W. Cousins introduces the Lanchester reconstruction to a broader public, namely the Meccano fans.
1956 J. Coales points out that by hanging a carrot from the emperor's hand, the south-pointing chariot would become self-steering!
1977 Professor André Wegener Sleeswyk publishes a scientific essay on the historic chariots. He proves their feasibility exactly to the words in the ancient texts.
1978 Dr. Alan Partridge starts a contest in Meccano Magazine for the design with the fewest gears. It is shown subsequently that no gears are necessary at all!
1979 Dr. Noel C. Ta'Bois (LDS RCS Eng) publishes a concise treatise on the theoretical aspects. Working specimens are shown, which do not adhere to the "width equals wheel diameter" rule.
1979 Lu Zhiming produces three reconstructions based on differential gears.
1980 Mr. Don Frantz from New York re-discovers the south-pointing chariot, builds models along the Lanchester path and manages to place them in the Museum of the Province of Xian.
1982 Yan Zhiren builds another model, stressing that only differential gears provide the accuracy reported by the old writings.
1991 Mr. M. Santander from Spain proposes to use the chariot to teach students the basic concepts of parallel transport and curvature. En passant a mathematical model is given for Mr. Nuttall's design.

Where they can be seen

While none of the historic south-pointing chariots remain, full sized replicas can be found.

The History Museum in Beijing, China holds a replica based on the mechanism of Yen Su (1027). The National Palace Museum in Taipei, Taiwan holds a replica based on the Lanchester mechanism of 1932.

Referred to as the "southern pointing man", two replicas can also be seen (and physically experimented with) at the Ontario Science Centre in Toronto Canada.

See also

Notes

  1. ^ Needham, Volume 4, Part 2, 40.
  2. ^ a b c d Needham, Volume 4, Part 2, 288
  3. ^ Needham, Volume 4, Part 2, 286.
  4. ^ Needham, Volume 4, Part 2, 286–287.
  5. ^ a b Needham, Volume 4, Part 2, 287.
  6. ^ Needham, Volume 4, Part 2, 287–288.
  7. ^ a b Needham, Volume 4, Part 2, 289.
  8. ^ a b c d Needham, Volume 4, Part 2, 291.
  9. ^ Needham, Volume 4, Part 2, 291–292.
  10. ^ a b c d e Needham, Volume 4, Part 2, 292.
  11. ^ a b c Needham, Volume 4, Part 2, 298.

References

External links